exhaust pic request
Thread Starter
Joined: Jan 2007
Posts: 1,000
Likes: 0
From: st. louis
exhaust pic request
I dont know if any FC guys have done this but im looking for a few pictures of 5"+ muffler tips. Im looking at this:
or
http://store.summitracing.com/partde...5&autoview=sku
i figure im doing a 4" dp back exhaust i might as well have the most retardedly large muffler tip
yes i know thats really FOBby.
thanks guys
or
http://store.summitracing.com/partde...5&autoview=sku
i figure im doing a 4" dp back exhaust i might as well have the most retardedly large muffler tip
yes i know thats really FOBby.thanks guys
I really see no point of having a 4" exhaust unless you have huge problem with backpressure, unless your a mk4 supra with a huge single turbo that have alot back pressure that requires a 4" dp.
GReddy Power Extreme's are 4" tips.. I can't imagine a tip larger than that on a 7 without looking insanely ricey. 4" exhaust would be insane. 3" is big enough unless you are turbo diesel.
Thread Starter
Joined: Jan 2007
Posts: 1,000
Likes: 0
From: st. louis
um back pressure is bad. I talked to zeror and he used to run a4" dp back exhaust. This is going onto a hbp 13b with a 500r turbo running meth injection and boost pressures in the high 20s. I know there are quite a few FD guys running 4" dp back on big singles. Just kinda want to see if a 5 or 6" tip looks totally retarded. if it does i guess ill just take a piece of 4" stainless tubing, polish it up and fire it out the back
Thread Starter
Joined: Jan 2007
Posts: 1,000
Likes: 0
From: st. louis
https://www.rx7club.com/showthread.p...haust%2C+aspec
this is one of the fds i was thinking about. we are running the same turbo more or less. only difference is my turbo has the anti surge housing.
this is one of the fds i was thinking about. we are running the same turbo more or less. only difference is my turbo has the anti surge housing.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
Comments and Suggestions Archive
0
Aug 19, 2015 01:01 PM





