Engine wont start...
#1
Full Member
Thread Starter
Join Date: Oct 2005
Location: Arizona
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Engine wont start...
so i bought a new intake filter and i discconected the stock intake but left and i disccontect a wire that i think i should have that is connected to the intake box... at the buttom ... so now i tryed hooking everthing back up and plug the wire back in but the car still wont start... do i need somthing?
#2
Iraqi's Hate Me
Join Date: Nov 2005
Location: From: Phoenix\Stationed: Germany
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thdkris
so i bought a new intake filter and i discconected the stock intake but left and i disccontect a wire that i think i should have that is connected to the intake box... at the buttom ... so now i tryed hooking everthing back up and plug the wire back in but the car still wont start... do i need somthing?
#3
Full Member
Join Date: Jul 2005
Location: San Fernando Valley
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
your unplugged either the "wire" the AFM connector or you unplugged a hose which is for the airpump which should do anything your best bet is you disconnected the afm try re-attaching it and hitting the key make sure it clicks when you connect it
#4
Full Member
Thread Starter
Join Date: Oct 2005
Location: Arizona
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
ok so i put the stock intake back on.. and i connected the wires to the intake thingy again.. and it makes that clicking noise.. but my engine still wont start.. its the part were if you buy a new intake you have to get an adapter.. and the adapter connect to the the part that i fucked up! man i dont know what to do lol.... i think i need to buy a new one.. like a whole new intake thing... but the engine started once and when i reved it it would stall kinda.. but if i reved it slow then it would be fine untill it got up to like 5 or 6 grand
#5
Full Member
Thread Starter
Join Date: Oct 2005
Location: Arizona
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thdkris
so i bought a new intake filter and i discconected the stock intake but left and i disccontect a wire that i think i should have that is connected to the intake box... at the buttom ... so now i tryed hooking everthing back up and plug the wire back in but the car still wont start... do i need somthing?
#6
Full Member
Thread Starter
Join Date: Oct 2005
Location: Arizona
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
http://www.1300cc.com/howto/how2/TID.htm
ok go to this guys website.. and scroll all the way down and look at the last picture..and you can see a bunch of yellow wires.. but ignore them! look at the black wire ... thats the wire that connects to the intake ... thats the wire that i dissconected..
ok go to this guys website.. and scroll all the way down and look at the last picture..and you can see a bunch of yellow wires.. but ignore them! look at the black wire ... thats the wire that connects to the intake ... thats the wire that i dissconected..
#7
Full Member
Thread Starter
Join Date: Oct 2005
Location: Arizona
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
or just look at the picture above that one.. and look at the wire thats closest to the camrea... the wire that is touching the intake... it has a lil black thing around it.. andits going down.. its connect to the intake..
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM