88fc3sdrifting

ok so 2day i found out that the front rotor on my t2 engine is blown cause is stuck apex seals. so my ? is is it possible 2 opean up only the engine without missing up the housing seals just 2 replace the apex or do i have to do a whole rebiult im asking cuzz i have no clue if its possible

Jims5543

iTrader: (2)

No, once you open the engine you need to replace all the o-rings, if you want to do it correctly.

Its one of those, while your in there, type of deals, you may as well replace all the apex, side and corner seals, while your in there.

87 t-66

iTrader: (133)

your english is terrible.

if you're sure its a stuck apex seal i would try putting oil into the spark plug holes and turn the engine over. you can also try taking off the exhaust manifold and looking inside to see if a seal is stuck. you might be able to gently loosen it.

88fc3sdrifting

yea ive done all of that the seals are really stuck they do not move at all