Engine overhaul list
#1
1.3?!?!
Thread Starter
Join Date: Jun 2005
Location: Toledo
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Engine overhaul list
Alright everybody, in the next few weeks I am planning on doing my very first rebuild. I've read through the archives and done other reading. I will also be giving it a streetport. It is a 1988 TII. Here is my list so far.....
Atkins Rotary 87-88 Turbo overhaul kit C,
http://www.atkinsrotary.com/store/cu...cat=591&page=1
This includes most eveything to replace for the basic rebuild I believe, correct me if I am wrong. I know there are other things I need to inspect and check other parts to see if they need to be replaced. I just want to make sure this is a good kit to go with, and if there are other things I should get, please let me know.
The Atkins Rotary Instructional Video,
http://www.atkinsrotary.com/store/cu...95&cat=0&page=
Also, since I will be streetporting it, I realize I will need to upgrade a few things.
These few things being a better fuel pump, larger injectors, a F.C.D, new exhaust sytem, port stock turbo wastegate, new intake, new fuel rail?, maybe a fuel computer like the SAFCII? I'm not quite positive if thats all I will be needing for now. If I am missing anything, please let me know.
I would like to work my way towards 250whp, but that's in the future. I just want to set my car up right for now. Please let me know if this setup would be correct or not.
Thanks,
Jordan
Atkins Rotary 87-88 Turbo overhaul kit C,
http://www.atkinsrotary.com/store/cu...cat=591&page=1
This includes most eveything to replace for the basic rebuild I believe, correct me if I am wrong. I know there are other things I need to inspect and check other parts to see if they need to be replaced. I just want to make sure this is a good kit to go with, and if there are other things I should get, please let me know.
The Atkins Rotary Instructional Video,
http://www.atkinsrotary.com/store/cu...95&cat=0&page=
Also, since I will be streetporting it, I realize I will need to upgrade a few things.
These few things being a better fuel pump, larger injectors, a F.C.D, new exhaust sytem, port stock turbo wastegate, new intake, new fuel rail?, maybe a fuel computer like the SAFCII? I'm not quite positive if thats all I will be needing for now. If I am missing anything, please let me know.
I would like to work my way towards 250whp, but that's in the future. I just want to set my car up right for now. Please let me know if this setup would be correct or not.
Thanks,
Jordan
#5
Two drops of Superglue
Join Date: Jul 2003
Location: Fort Collins, CO
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I have both the atkins video and the rotary aviation vid, and i thought the rotary avation one was slightly more informative. I got them for my first rebuild on anything and they both had info the other one lacked. the only problem i had, you wont have, because the RA vid is a S4 and i have an S5.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
thecody59
1st Generation Specific (1979-1985)
40
08-23-15 06:41 PM
befarrer
Microtech
3
08-22-15 05:52 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM