2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Engine Dies, won't go into gear, smells like burning

Thread Tools
 
Search this Thread
 
Old 01-21-08, 08:09 PM
  #1  
smells like rotary

Thread Starter
 
gscully's Avatar
 
Join Date: Jan 2003
Location: Toronto
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Engine Dies, won't go into gear, smells like burning

I have a '88 NA with 180,000kms on it. As back reference it always starts no prob, doesn't have hot start problems doesn't burn coolant. It's been tough getting into 1st gear but has always been like that I just assumed it's how they are.

Sunday I was driving home everything was working fine I ran it through 1st and 2nd gear then about 20 sec later the clutch was feeling a little soft like there was air in the line. I was about 1 min from my place with a shitload of groceries so I though I could nurse it back. Then every time I pressed the clutch there was a whirring sound then as I tried to change into 2nd it was screetching so I put it in neutral and stopped right away. I popped the hood and it smelled like burning. I then tried to start it and it just cranked but wouldn't start. I pulled the ecu fuse cranked for 10 sec, replaced fuse and it started. I then when I pressed the clutch tried to put it in gear it wouldn't go in gear and the engine died and wouldn't restart. I first though it was clutch related but I don't know why that would stop it from running or starting. Anyone have a similar situation, Almost seems like what happens to 2G DSMs when they get crankwalk.
Old 01-21-08, 08:47 PM
  #2  
rotors excite me

iTrader: (16)
 
SpeedOfLife's Avatar
 
Join Date: Jun 2006
Location: Central Iowa
Posts: 4,083
Likes: 0
Received 9 Likes on 6 Posts
Well my first instinct is 'clutch', but I can't be sure. My only other guess might be you spun a bearing in the motor, but I don't think that lines up with the 'not going into gear' symptom.

*bear in mind I haven't seen this particular problem before
Old 01-21-08, 08:50 PM
  #3  
Reppin' the Burbs

iTrader: (8)
 
Rathmar's Avatar
 
Join Date: Oct 2005
Location: Tottenham, Ontario
Posts: 387
Likes: 0
Received 0 Likes on 0 Posts
Do you know when the clutch was last changed? Sounds like what happened to me when my clutch fell apart, strange that it wont start in neutral though.
Old 01-21-08, 08:53 PM
  #4  
Panties Explode

 
Snack's Avatar
 
Join Date: Jun 2004
Location: Miami
Posts: 750
Likes: 0
Received 0 Likes on 0 Posts
my guess..... bad clutch and bad motor..... **** hit the fan all at once?
Old 01-21-08, 10:52 PM
  #5  
Junior Member
 
Riicedevil's Avatar
 
Join Date: Jan 2008
Location: wichita ks
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
i've had the same problem with clutch on my other cars when i went to the shop they pretty much told me to replace the whole clutch becouse for some reason T/O bearing wore out and did crazy stuff,...my suggestion change new clutch and about the engine dieing im also clueless about that good luck
Old 01-21-08, 10:58 PM
  #6  
RX-7 DISCIPLE

iTrader: (1)
 
Ex-Eg-Driver's Avatar
 
Join Date: Nov 2007
Location: NorCal,California
Posts: 1,039
Likes: 0
Received 0 Likes on 0 Posts
check your fluids...
Old 01-22-08, 05:35 PM
  #7  
smells like rotary

Thread Starter
 
gscully's Avatar
 
Join Date: Jan 2003
Location: Toronto
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Fluids are fine they were the first thing I checked
Old 01-22-08, 11:00 PM
  #8  
Zombie Response Team

 
somebody5788's Avatar
 
Join Date: May 2007
Location: Warsaw, Indiana
Posts: 396
Likes: 0
Received 0 Likes on 0 Posts
Well I would say obvious clutch problem whether its the disc or the hydraulic portion. Did it not just flood again since it died on you? You were not too clear about whether you tried unflooding a second time or not. Thats about all I am useful for sorry.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
rotor_veux
2nd Generation Specific (1986-1992)
10
08-23-15 09:06 PM
pzr2
General Rotary Tech Support
1
08-15-15 08:29 PM



Quick Reply: Engine Dies, won't go into gear, smells like burning



All times are GMT -5. The time now is 05:40 AM.