2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Electric Problem - headlights stuck on full beam

Thread Tools
 
Search this Thread
 
Old 10-11-07, 05:22 AM
  #1  
Junior Member

Thread Starter
 
doddy's Avatar
 
Join Date: Mar 2005
Location: Belfast
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Electric Problem - headlights stuck on full beam

1989 Turbo II

Car was fine when my dad got it, but after going over a bump the headlights came up stuck on main beam, and it stayed that way.

This is what I've traced:

1 - Everything is fine with ignition off
2 - Turn on ignition and you can't turn main beam off.
3 - remove the ILLUM and/or TURN 15A fuses and the headlights work fine.

So I think the switches are fine so the problem might be in the fuse box or the loom.
Old 10-11-07, 06:39 AM
  #2  
THE Mazdabator

 
Mechanic's Avatar
 
Join Date: Dec 2005
Location: NY
Posts: 597
Likes: 0
Received 0 Likes on 0 Posts
well i had a similar problem on a yota rav 4... i just found a blown fuse and it fixed it.. strange.

check and make sure none of the harness is rubbing direct contact with something up front too...
Old 10-11-07, 07:33 AM
  #3  
Junior Member

Thread Starter
 
doddy's Avatar
 
Join Date: Mar 2005
Location: Belfast
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
yeh I've had a go at the harness - when I stripped the section across the front some water came out which is not good. I soaked it in WD40 and dried it off but no joy.

Now that I know that the sidelight/turn signal fuse is relevant I'll know what bits of the loom to focus on...

Cheers,
dod
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
fastsaab
New Member RX-7 Technical
5
08-19-15 11:42 AM
Turblown
Single Turbo RX-7's
0
08-14-15 04:48 PM



Quick Reply: Electric Problem - headlights stuck on full beam



All times are GMT -5. The time now is 04:10 AM.