EGTs '89 GTU -VIDs- 56k yes, cable yes, T1, yup.....
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
I'm just now publishing a second set of movies from a recording I made yesternight. I was able to get the S-AFC II in the shot but the zoom killed me a bit. :/
I'll post links shortly.
I'll post links shortly.
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
OK guys, Hopefully you all can read the EGT/AFC well enough!
Three files like before, right click and save as please!
Low Rez(56k) http://www.aztechrotary.com/EGTRUN2.wmv 3.09mb
DSL/Cable http://www.aztechrotary.com/EGTRUN2L.wmv 17.3mb
Ultra High Speed http://www.aztechrotary.com/EGTRUN2XL.wmv 20.7mb
Three files like before, right click and save as please!
Low Rez(56k) http://www.aztechrotary.com/EGTRUN2.wmv 3.09mb
DSL/Cable http://www.aztechrotary.com/EGTRUN2L.wmv 17.3mb
Ultra High Speed http://www.aztechrotary.com/EGTRUN2XL.wmv 20.7mb
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Originally Posted by T-Rex86
I'm just getting into fuels and sensors.Just wondering since you seem informative on the subject, the PCM goes into open loop at idle and WOT right?
Therefore your EGT readings would be based on your(his FC in this case) PCM pre-programmed values for A/F settings as the sensors are disregarded in open loop?So am i right in saying his EGT readings wouldn't change from his current WOT reading to another value after he connects the 02 sensor? Help a newbie out lol.
When the ECU does go into closed-loop, it gets very hot, as it tries to maintain a 14.7:1 stoic ratio.
Through my experience, any heavy load EGT *should* be cooler than this EGT at closed-loop.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
Oct 17, 2020 03:25 PM
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
Sep 30, 2015 08:13 PM
