ECU engine swap wiring questions
#1
Full Member
Thread Starter
ECU engine swap wiring questions
I am putting the engine of my 91 vert into an old english car. I would like to use the computer and wiring harness. Any ideas on the level of difficulty and where
I could find some information? It would also be helpful to know which systems can be eliminated and which need to stay in place.
Thanks
I could find some information? It would also be helpful to know which systems can be eliminated and which need to stay in place.
Thanks
#3
I break Diff mounts
iTrader: (1)
Yeah a standalone would be best because you'll have to swap a bunch of stuff.
A conversion in a NA to TII needs a
ECU and harness and some rewiring to a few connectors in the interior harness.
I don't know how you would set up the guages and so on.
It might be best to check the conversion section.
A conversion in a NA to TII needs a
ECU and harness and some rewiring to a few connectors in the interior harness.
I don't know how you would set up the guages and so on.
It might be best to check the conversion section.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM