rxbaby7

iTrader: (1)

Just as the title states can anyone help me with my blinker issue on my driver side. I took it apart but can't seem to find the bulb just the two wire and ground. I checked out the manual but it was like talking to someone on Wall Street!! Anyways I know you guys are good here so please help a rotary brotha out!! 😎

barkz

iTrader: (1)

Can't find the bulb that won't blink... maybe put a bulb in it? Dash light blinking? Hearing the relay clicking?

rxbaby7

iTrader: (1)

sounds like you rapping lol. Let me find out your ghost writing the whip!!! Just playing bro. But back to the rx, yea the dash light blicks but blicks only for the rear taillight and it actually blinks faster than the passenger side. How do you get the bulb out though? Cause when I unscrewed the blinker light, in the back of it was just wires no bulb.. Do you have a diagram of how to take it out with ripping the wires? Thanks bro

rxbaby7

iTrader: (1)

Without ripping the wires!!

barkz

iTrader: (1)

Faster blinking usually means blown bulb or wrong bulb. Sounds like no bulb in your case. It should be just two screws holding the housing on and then boom socket for bulb with wires in it. I think youre over thinking it.

rxbaby7

iTrader: (1)

Thanks bro appreciate it

rxbaby7

iTrader: (1)

I changed the bulb its on but not blinking can it be a relay it's only a one side

pfsantos

iTrader: (1)

Make sure the bulb socket is clean and not gunked up or corroded.

j9fd3s

iTrader: (3)

i had one where the solder joint on the relay went bad, took 5 minutes with a soldering iron to fix.

rxbaby7

iTrader: (1)

Where's the relay located at

misterstyx69

iTrader: (142)

did you use the right Bulb?..1157 I believe is the bulb part #.