2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

door locks

Thread Tools
 
Search this Thread
 
Old May 21, 2008 | 10:26 PM
  #1  
zehro's Avatar
Thread Starter
Dorito Spinner
 
Joined: Apr 2008
Posts: 38
Likes: 0
From: d-ville, Georgia
door locks

hey guys, gotta fun one for ya...i have manual door locks, and my pass side door lock wont lock/unlock from outside with key.....(simple problem i bet) but the kicker is my driver side door lock works outside with key and will unlock inside...BUT...if you lock it from inside and shut the door it automatically pops up and unlocks lol what gives...if i want to lock my car i always have to use the key....

help....
Reply
Old May 21, 2008 | 10:55 PM
  #2  
Howru's Avatar
I
Tenured Member: 20 Years
iTrader: (25)
 
Joined: Dec 2005
Posts: 651
Likes: 1
From: Vallejo, CA
Did you hold up the handle when you close the driver's door?
Reply
Old May 21, 2008 | 11:11 PM
  #3  
zehro's Avatar
Thread Starter
Dorito Spinner
 
Joined: Apr 2008
Posts: 38
Likes: 0
From: d-ville, Georgia
nope
Reply
Old May 21, 2008 | 11:31 PM
  #4  
Rx-7fetish's Avatar
The Blue Blur
Tenured Member 05 Years
 
Joined: Dec 2006
Posts: 716
Likes: 0
From: Virginia
Hold the handle up when shutting it, as far as i can figure its some safety feature so you cant accidently lock your keys in the car, my driver side does it too
Reply
Old May 22, 2008 | 07:57 AM
  #5  
l4nc3r's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Oct 2006
Posts: 193
Likes: 0
As for the fact that you cannot unlock it from the outside passenger, It's either a seized/rusted lock or it's not hooked up somewhere. I just recently had to replace all my door handles and locks on my car and it's actually quite fun to get inside and clean everything up. Try taking your door handle off and the lock mechanism out and taking it to a locksmith type place. They will most likely be able to fix the inside of the lock.
Reply
Old May 22, 2008 | 11:32 PM
  #6  
AreExSevenProject's Avatar
drift city
iTrader: (1)
 
Joined: Nov 2007
Posts: 359
Likes: 0
From: Oregon
check if its broken or if the tumblers are worn...
Reply
Old May 23, 2008 | 12:33 AM
  #7  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
clip may be off on the passenger Side,to the rod that activates the Mechanism..And Yah,you have to Hold the handle UP on the Door While shutting it,when Locking the door,or it just Disengages the lock,and it stays unlocked..
Reply
Old May 23, 2008 | 10:24 AM
  #8  
AreExSevenProject's Avatar
drift city
iTrader: (1)
 
Joined: Nov 2007
Posts: 359
Likes: 0
From: Oregon
pull you interior piece off your door and take a picture and I bet we could tell you what the problem is...
Reply
Old May 23, 2008 | 02:21 PM
  #9  
88rxn/a's Avatar
tom port.. AKA streetport
Tenured Member 15 Years
iTrader: (6)
 
Joined: Jan 2005
Posts: 4,658
Likes: 0
From: ludlow, pa
so the locks can be changed without replacing door handle also?
Reply
Old May 23, 2008 | 08:12 PM
  #10  
AreExSevenProject's Avatar
drift city
iTrader: (1)
 
Joined: Nov 2007
Posts: 359
Likes: 0
From: Oregon
yes
there is a write up about how to change your tumblers...
its not allthat hard at all.
but if the little pot metal pieces are broke you have to change everything...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
19
Sep 15, 2015 12:03 AM




All times are GMT -5. The time now is 09:41 AM.