Does the fan need to come off to change the belts?
09-20-05, 10:35 PM
#1
Newbie
Thread Starter
Join Date: Sep 2005
Location: Jax, FL
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Does the fan need to come off to change the belts?
Hi guys,
I have a new-to-me '88 RX-7GXL. I am going to do a tune up to make sure everything is good-to-go. I was looking at the belts this afternoon and wondering if thre is a way to get the two belts that are "captured" by the fan off without removing the fan.
Thanks in advance,
Jim Moore
I have a new-to-me '88 RX-7GXL. I am going to do a tune up to make sure everything is good-to-go. I was looking at the belts this afternoon and wondering if thre is a way to get the two belts that are "captured" by the fan off without removing the fan.
Thanks in advance,
Jim Moore
09-20-05, 10:38 PM
#2
(_8(|)
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
NO, work the belts inbetween the blades, that allows for more room to clear the opposite blades. pretty easy, i just suck at explaining.
Last edited by 88t2romad; 09-20-05 at 10:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM