does anyone sell this pre-made flange?
01-09-05, 10:34 AM
#1
Mechanical Engineering
Thread Starter
does anyone sell this pre-made flange?
Hey all
i was looking on the RB site and i was looking at the BOVs and they dont have one for the S4 TII. they have an S5 TII kit. but i was wondering if anyone made that little tube and mounting flange all in one piece. like the one shown below and does that hook up before the TMIC? or is it somewhere else?
i was looking on the RB site and i was looking at the BOVs and they dont have one for the S4 TII. they have an S5 TII kit. but i was wondering if anyone made that little tube and mounting flange all in one piece. like the one shown below and does that hook up before the TMIC? or is it somewhere else?
Last edited by capn; 01-09-05 at 10:39 AM.
01-09-05, 05:47 PM
#4
Y00s a h000
Join Date: Jul 2003
Location: Central NJ
Posts: 1,913
Likes: 0
Received 0 Likes
on
0 Posts
Not to hijack the thread or anything, but is there anything wrong with just using the stock BOV lines and hooking it to an aftermarket one? I don't see the point of these flanges?
01-09-05, 09:27 PM
#6
Mechanical Engineering
Thread Starter
no guys you mis-interpreted me i know where the flanges are sold, i am talking about the WHOLE thing pipe included that is premade for an S4 turbo. where can i get that, or do i have to weld something again?
01-09-05, 09:32 PM
#7
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
buy any BOV kit for the rx7 and it will come with it... it replaces the stock pipe that looks exactly the same between the turbo and IC.
I'm not sure if there is even a diff between S4 pipes and S5 either.
I'm not sure if there is even a diff between S4 pipes and S5 either.
Last edited by Scott 89t2; 01-09-05 at 09:36 PM.
Trending Topics
01-09-05, 09:35 PM
#8
Mechanical Engineering
Thread Starter
Originally Posted by Scott 89t2
buy any BOV kit for the rx7 and it will come with it... it replaces the stock pipe that looks exactly the same between the turbo and IC.
01-10-05, 01:08 AM
#9
Lives on the Forum
You don't NEED that pipe.
If you do NOT get that pipe, you NEED to weld something up, period.
The only exception is that some aftermarket BOV's use hose fittings, which can easily be installed in place of the stock BOV.
Most of the Japan manufacturers require flanges.
-Ted
If you do NOT get that pipe, you NEED to weld something up, period.
The only exception is that some aftermarket BOV's use hose fittings, which can easily be installed in place of the stock BOV.
Most of the Japan manufacturers require flanges.
-Ted
