Does anybody have a picture of how to route the engine harness?
02-22-11, 01:06 PM
#1
Resident Rotard
Thread Starter
Join Date: May 2009
Location: Belleville, Illinois
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody have a picture of how to route the engine harness?
-EDIT- By engine harness I mean the wiring harness that goes from the passenger side and includes the fuel injector connectors and the solenoid connectors.
I keep on having to take off my manifolds to move the harness around.
Either I can't get all my crank angle sensor plugged in or the plugs towards the firewall won't reach.
I had it pretty close earlier, but was going to have to extend a few of the wires to get it all to work.
I have to take apart everything to get to a firewall heater hose because as I was filling the antifreeze I noticed it all was pouring out.....
I keep on having to take off my manifolds to move the harness around.
Either I can't get all my crank angle sensor plugged in or the plugs towards the firewall won't reach.
I had it pretty close earlier, but was going to have to extend a few of the wires to get it all to work.
I have to take apart everything to get to a firewall heater hose because as I was filling the antifreeze I noticed it all was pouring out.....
Last edited by slitherz90gxl; 02-22-11 at 01:08 PM. Reason: Messed up.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
