Disabling the oil bypass thermostat?
#1
In the shade
Thread Starter
Join Date: Jun 2009
Location: PA
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Disabling the oil bypass thermostat?
In the bruce turrentine video: Overhauling Mazda's 13b, there is a modification section. One of the mods is to permanently open the oil bypass thermostat so that there is no warm up period and no chance of it being stuck closed and not letting out oil.
Is this a common mod for FC rx7s? Is it recommended? What can go wrong. I couldn't find anything in search, only oil cooler thermostat info.
BTW, his method for disabling it is to place a measured (.4 inches I believe) cut piece of bolt into the e-shaft pulley bolt and epoxy that so it always has the spring in the open position.
Is this a common mod for FC rx7s? Is it recommended? What can go wrong. I couldn't find anything in search, only oil cooler thermostat info.
BTW, his method for disabling it is to place a measured (.4 inches I believe) cut piece of bolt into the e-shaft pulley bolt and epoxy that so it always has the spring in the open position.
#2
rotorhead
iTrader: (3)
I believe Mazdatrix sells this to do the same job:
http://www.mazdatrix.com/b5.htm scroll down to number 11
http://www.mazdatrix.com/b5.htm scroll down to number 11
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM