2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Diff Mount Question

Thread Tools
 
Search this Thread
 
Old Jun 24, 2006 | 03:56 PM
  #1  
iSP33D-for-J3SUS's Avatar
Thread Starter
s4 Tails for Life!
Tenured Member 05 Years
 
Joined: Feb 2005
Posts: 577
Likes: 0
From: Dallas, TX
Talking Diff Mount Question

Hey everyone, so I'm pretty sure my front diff mount is beat but my question is, do I need to replace my rear diff mounts as well the front mount? What are the symptoms of bad rear mounts? Right now my car "pops" when you shift and / or lay on the throttle hard. Should they be replaced together (front and rear) or does it really matter?

Thanks,
iSP33D-for-J3SUS
Reply
Old Jun 24, 2006 | 05:37 PM
  #2  
spot_skater's Avatar
The Cause of Death
Tenured Member 10 Years
 
Joined: Mar 2004
Posts: 2,202
Likes: 2
From: New York
If you've got the cash and access to a press, might as well do 'em all while it's out.

Get the competition mounts, by the way. They're cheaper
Reply
Old Jun 24, 2006 | 07:06 PM
  #3  
ROTARYROCKET7's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
 
Joined: Jun 2005
Posts: 3,154
Likes: 1
From: Queens, NYC
Originally Posted by spot_skater
If you've got the cash and access to a press, might as well do 'em all while it's out.

Get the competition mounts, by the way. They're cheaper
Besides being stiffer whats the real advantage of them being stiffer.

The only attractive option about the competition is that there CHEAPER for my pockets

Jason NYC
Reply
Old Jun 25, 2006 | 07:33 AM
  #4  
FC_Bryan's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 9
Likes: 0
From: Florida
yeah thats not the diff mount he means....you have a bad diff mount in the verry fron of the diff next to the drive shaft yoke and if is a must have, now i am going to give you very good advise here....i went through 5 of these and they cost like 150 or 200 new CRAZY, you can take the broke mount to a weld shop and for about 5 to 10 dollers they can weld it you for you then it is a solid mount and will never break again, dont ask me y it took me 5 of those to realise it was that easy

if you want to make sure that that is the diff that is bad take and powerbreak your car if you hear and feel something hitting rite behind your seat that is the porblem....hope it helps
Reply
Old Jun 26, 2006 | 09:37 AM
  #5  
impulsive-rx7's Avatar
I hate this f0rum
Tenured Member 20 Years
iTrader: (2)
 
Joined: Mar 2001
Posts: 728
Likes: 0
From: Leesburg, GA
Originally Posted by FC_Bryan
yeah thats not the diff mount he means....you have a bad diff mount in the verry fron of the diff next to the drive shaft yoke and if is a must have, now i am going to give you very good advise here....i went through 5 of these and they cost like 150 or 200 new CRAZY, you can take the broke mount to a weld shop and for about 5 to 10 dollers they can weld it you for you then it is a solid mount and will never break again, dont ask me y it took me 5 of those to realise it was that easy
If you put a solid mount on there, be prepared for something else to break next time, like the subframe. I did it with the Mazda rubber competition mount.

Originally Posted by FC_Bryan
if you want to make sure that that is the diff that is bad take and powerbreak your car if you hear and feel something hitting rite behind your seat that is the porblem....hope it helps
Or you could just jack up the rear of the car, look at it and push up on the rear of the driveshaft to see if the mount's broke.

iSP33D-for-J3SUS, You might as well replace the rear mounts as well while you have it apart. Even if it doesn't make a difference, at least for the peace of mind. I wish I had done that.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM




All times are GMT -5. The time now is 04:50 AM.