2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Dead Engine? Seized engine?

Thread Tools
 
Search this Thread
 
Old Sep 18, 2003 | 05:26 PM
  #1  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 136
Likes: 0
From: Fresno, CA
Dead Engine? Seized engine?

Okay, I need to know if my engine is totally fucked. The car is an 88 TII.

I was driving around a corner, on redline, maybe a bit below, in oversteer, when the engine died. No fanfare or anything, just died. No bangs, smoke, metallic noises, nothing.... just dead engine. A few seconds before it started boosting eratically... but that was it.

Now nothing happens when I turn the engine over. It just shakes for a half second and does nothing, like its locked up or something. Does it in neutral, clutch in while in gear, anything. Also, the car is unpushable while in gear.

ANy ideas as to what might be going on? I didnt think a rotary could seize up like this.
Reply
Old Sep 18, 2003 | 05:31 PM
  #2  
dr0x's Avatar
pei > caek
Tenured Member 05 Years
 
Joined: May 2002
Posts: 4,643
Likes: 0
From: Mars
Read both these threads.

https://www.rx7club.com/forum/showth...ghlight=carbon

https://www.rx7club.com/forum/showth...ghlight=carbon
Reply
Old Sep 18, 2003 | 05:32 PM
  #3  
ERAUMAZDA's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 1,351
Likes: 0
From: Daytona beach
ummmmm. you redlined in a turn. You sure you didn't screw your diff or half-shafts. You shouldn't redline in a turn.
Reply
Old Sep 18, 2003 | 05:36 PM
  #4  
dr0x's Avatar
pei > caek
Tenured Member 05 Years
 
Joined: May 2002
Posts: 4,643
Likes: 0
From: Mars
Originally posted by ERAUMAZDA
ummmmm. you redlined in a turn. You sure you didn't screw your diff or half-shafts. You shouldn't redline in a turn.
It doesnt matter if he was at 7000rpm or 2000rpm... At 20mph the rear end will be spinning the same speed regardless of engine speed. Transmissions are such neat things....
Reply
Old Sep 18, 2003 | 06:01 PM
  #5  
ERAUMAZDA's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 1,351
Likes: 0
From: Daytona beach
If he is in 2nd gear in a turn and redline...he is not going 20mph.
Reply
Old Sep 18, 2003 | 06:44 PM
  #6  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 136
Likes: 0
From: Fresno, CA
Originally posted by ERAUMAZDA
If he is in 2nd gear in a turn and redline...he is not going 20mph.
He is if the tires are spinning. . .
Reply
Old Sep 18, 2003 | 06:49 PM
  #7  
ERAUMAZDA's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 1,351
Likes: 0
From: Daytona beach
lol
Reply
Old Sep 18, 2003 | 06:53 PM
  #8  
dr0x's Avatar
pei > caek
Tenured Member 05 Years
 
Joined: May 2002
Posts: 4,643
Likes: 0
From: Mars
Originally posted by ERAUMAZDA
If he is in 2nd gear in a turn and redline...he is not going 20mph.
He didnt state his speed, it was an example...
Reply
Old Sep 18, 2003 | 06:58 PM
  #9  
ERAUMAZDA's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 1,351
Likes: 0
From: Daytona beach
no need to be an ***. geez
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
highspeedrider
New Member RX-7 Technical
3
Sep 8, 2015 07:55 PM
stickmantijuana
Microtech
5
Aug 23, 2015 11:04 AM




All times are GMT -5. The time now is 01:39 AM.