Dash troubles...neep help
#1
Full Member
Thread Starter
Join Date: Aug 2004
Location: Dublin, CA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Dash troubles...neep help
I am trying to replace my heater core on my 88 TII but cannot get my flippin dash off . I've disconnected the hood release lever, the steering column, all the heater hoses, the four bolts on the side of the dash, taken the gauges and instrument panels off, and the glove box, and a/c box. What else am I missing? It feels like the sides are loose, but something still feels like it is still connected by the warning light deal. Any tips or tricks would be greatly appreciated.
--Shaun
--Shaun
#2
go from one end to the other end of the dash feeling around ull probably find something connected. get a manual, and some one to help. i did an s5 to s4 chassis and interior wireing conversion. im sure ull figure it out
#4
Full Member
iTrader: (1)
Join Date: Jan 2003
Location: lexington
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Behind the warning lights there is a bolt that holds the dash in . there are also a total of 4 bolts 2 on each side of the center of the dash. If you didn't drop the steering column yet, you will need to do that too. hope this helps
#5
i'm disrespectful to dirt
Thread
Thread Starter
Forum
Replies
Last Post