I am trying to replace my heater core on my 88 TII but cannot get my flippin dash off . I've disconnected the hood release lever, the steering column, all the heater hoses, the four bolts on the side of the dash, taken the gauges and instrument panels off, and the glove box, and a/c box. What else am I missing? It feels like the sides are loose, but something still feels like it is still connected by the warning light deal. Any tips or tricks would be greatly appreciated.

--Shaun

 

go from one end to the other end of the dash feeling around ull probably find something connected. get a manual, and some one to help. i did an s5 to s4 chassis and interior wireing conversion. im sure ull figure it out

 

If you take the metal trim piece right up next too the windshield off where the defrost grills are there are some bolts holding the dash in there too i think

Hopefully that helps

Later

 

Behind the warning lights there is a bolt that holds the dash in . there are also a total of 4 bolts 2 on each side of the center of the dash. If you didn't drop the steering column yet, you will need to do that too. hope this helps

 

hope this helps...

https://www.rx7club.com/2nd-gen-archive-72/dash-removal-how-230335/

 

Thanks for the help guys.