crank angle sensor help please!

Reply Subscribe

Thread Tools

Search this Thread

Jul 24, 2005 | 10:35 PM

88 GRIP

Thread Starter

Junior Member

Joined: May 2005

Posts: 14

Likes: 0

From: az

crank angle sensor help please!

I know this sounds crazy but while putting my engine back together I could not for the life of me find where the crank angle sensors 4 prong clip plugs into!!
Is it into the engine harness or something else? I already looked at the FSM.

Pictures would be awesome. .............THANKS!

Jul 24, 2005 | 10:42 PM

YearsOfDecay

Locust of the apocalypse

Joined: Apr 2003

Posts: 2,553

Likes: 2

From: Directly above the center of the earth (York, PA)

The CAS's 4 prong connector is in with the alternator wiring harness.. its not on the main harness.

Jul 24, 2005 | 11:35 PM

HAILERS

HAILERS

Joined: May 2001

Posts: 20,563

Likes: 27

From: FORT WORTH, TEXAS,USA

Look and see if it's hiding under the solenoids on the left side of the engine. The solenoids connectors are a part of the EMISSIONS harness. The CAS connects to the ENGINE harness which includes the LARGEST wire on the alternator (not the small two wire connector on the alternator). The plug should be white in color.

Jul 24, 2005 | 11:55 PM

RotaryEvolution

Sharp Claws

iTrader: (30)

Joined: Oct 2003

Posts: 5,107

Likes: 50

From: Central Florida

follow the connector from the back of the alternator, the CAS plug should not be far down along that harness.

oh wait, that was already said 2 times!