CPU ground
04-08-04, 07:22 AM
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: Bakersfield,CA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
CPU ground
again i am doing the engine ground mod tomorrow and was wonderng what wire on the cpu do i ground? im pretty sure that it is a black wire but do u guys know for sure..
04-08-04, 07:31 AM
#2
Full Member
Thread Starter
Join Date: Oct 2003
Location: Bakersfield,CA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Also how can i check if my fuel gauge is gettin the correct amout of power cause the wires test light ok but my gauge stays at E all the time..ive trie everything im stumped....what is FSM?
04-08-04, 07:38 AM
#3
Full Member
Join Date: May 2003
Location: dayton, oh
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
fsm = factory service manual, you can d/l at http://www.teamfc3s.org/main/factory_service_manual/
there are four ground wires coming from the ecu i believe... the fsm has which ones they are.
for a s4 na pages 29 -33 of the chapter on fuel and emmisions control tell you what you need to know
there are four ground wires coming from the ecu i believe... the fsm has which ones they are.
for a s4 na pages 29 -33 of the chapter on fuel and emmisions control tell you what you need to know
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM