cooling system
#1
Rotary Enthusiast
Thread Starter
Join Date: Jan 2007
Location: California
Posts: 1,026
Likes: 0
Received 0 Likes
on
0 Posts
cooling system
I'm planning to do a 13BT TII swap and my cooling system is going bad. Where do I need to find the parts I need to complete it. If i get the motor from a good place like here http://www.jspecautosports.com/page.aspx?page_id=17 and they have all the parts for the swap. I need like the coolant system. any ideas
i'm still new at tihs lol and i do ask a lot of question, please help those expert rx7 out there
i'm still new at tihs lol and i do ask a lot of question, please help those expert rx7 out there
Last edited by CarzArKoo1; 04-03-08 at 06:29 PM.
#2
Full Member
Join Date: Jul 2007
Location: Sweetness, MN
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
What do you mean your cooling system is going bad. Is it leaking or overheating? I did the TurboII conversion a few months ago and I still have the stock Cooling system besides an electric fan.
#3
Rotary Enthusiast
Thread Starter
Join Date: Jan 2007
Location: California
Posts: 1,026
Likes: 0
Received 0 Likes
on
0 Posts
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
amazing..700 posts..OK..I'll Fill you in..make sure when you Get your Engine in(presuming that the engine is going to be Rebuilt as all Jspecs are Garbage and have been sitting somewhere Since the Car went to 60km In Japan).Once the Engine is IN you should Have already have IN the Car: a good RAD,A New set of Rad Hoses,new heater Hoses.and have available FRESH coolant to put into the Cooling System...IF the Cooling System is Leaking IN the car Right NOW,then By all means FIX IT..(If it is the Engine sucking Coolant you are replacing it,Right?,so this has Nothing to do with the rest of the Car's Cooling system,which REMAINS in the engine bay when you Swap)...good luck.
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM