When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys getting the rebuild motor install going.
I can t find the fl22 copy beck and arnkey anymore in store
I had an older post from many years ago and this was the beat cheap option. Not available in any store. Might need to hunt online.
anyone recommend any other coolants?
From what i remember not silicate was better.
The only green i can find is low silicate green fram coolant. Would low silicate damage the seals or shoulr a just find a better phoat coolant
I dont need it right now but i need to be ordering parts to finish this install.
FL-22 is the spec Mazda went to in 2006 or so. 0000-77-508F-20 is the Mazda part number.
its pre mixed, so you need 2 gallons. any of the FL-22 is going to be made in the same place, so you can just shop price/availability
the Rx7's used 0000-77-501E-02, which is not premixed. the FL-22 being premixed is an effort to control the PH of the coolant. you might price check the Mazda stuff, as a starting point
generally its not practical to ship coolant, so anything you buy in the US is mixed in the US, and there are only a couple factories, so the chance of all of the FL-22 coming from the same place is like 30% or more