Coolant passage from intermediate plate
02-12-07, 12:28 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: BossTown, MA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Coolant passage from intermediate plate
I need to know where the coolant from the intermediate plate goes. Its right behind and under the oil filler neck on the intermediate iron plate. I checked the coolant flow diagram but does not show anything for it at all. Could this be an oil passage(i dont think so). This is the diagram i was using.http://www.autosportracetech.com/RX-7/coolingsystem.htm
Thanks,
~Dave
Thanks,
~Dave
02-12-07, 12:35 PM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Aw, man, that ain't no coolant passage. That is a crankcase vent.
Talking about that approx .325 dia tube that is about an inch long facing aft????? Vent for the crankcase.
Talking about that approx .325 dia tube that is about an inch long facing aft????? Vent for the crankcase.
02-12-07, 12:43 PM
#3
Senior Member
Thread Starter
Join Date: Apr 2001
Location: BossTown, MA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HAILERS
Aw, man, that ain't no coolant passage. That is a crankcase vent.
Talking about that approx .325 dia tube that is about an inch long facing aft????? Vent for the crankcase.
Talking about that approx .325 dia tube that is about an inch long facing aft????? Vent for the crankcase.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM