complete set of 13b engine seals
#1
RX-Siete89
Thread Starter
Join Date: Feb 2005
Location: Los Angeles
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
complete set of 13b engine seals
does anybody know have a link where i can get a complete set of seals and gaskets for a 1989 13b engine. thanks for your help
#2
RX-Siete89
Thread Starter
Join Date: Feb 2005
Location: Los Angeles
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
please help, gasket questions
i have to rebuild my engine does anybody know have a link where i can get a complete set of seals and gaskets for a 1989 13b engine. thanks for your help
#5
Yes, that is my name.
Join Date: Nov 2004
Location: Santa Cruz Mtns
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Double post. You're going to **** off the moderators and old timers.
There's millions of places. Do a search for rebuilds. Atkins and Rotary Resurrection come to mind.
Always search and read the faq before posting, somones always aching to flame a noob. There's lots of great information in the archives as well. Good luck with your rebuild.
There's millions of places. Do a search for rebuilds. Atkins and Rotary Resurrection come to mind.
Always search and read the faq before posting, somones always aching to flame a noob. There's lots of great information in the archives as well. Good luck with your rebuild.
#6
Yes, that is my name.
Join Date: Nov 2004
Location: Santa Cruz Mtns
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Siete1991
how come no one checks out my question that not cool man. j/k but seriously i really need those gaskets
But seriously, I replied with something more helpful in your other thread.
Trending Topics
#8
Former Moderator. RIP Icemark.
Please only post once... your threads have been merged.
And do not bump in less than 24 hours. There are several of the admins and mods that beleive that any bumps should be deleted, because of the abuse of the bump. Just F^%$king wait for someone to answer. If 24 hours have gone by and you have not been replied too, then maybe think about a bump... but never before that.
And do not bump in less than 24 hours. There are several of the admins and mods that beleive that any bumps should be deleted, because of the abuse of the bump. Just F^%$king wait for someone to answer. If 24 hours have gone by and you have not been replied too, then maybe think about a bump... but never before that.
#10
Former Moderator. RIP Icemark.
Originally Posted by Karack
have a tea and relax Mark, it's going to be ok....
But since the guy is new, I figured I would cut him a little slack and just slap him around a little.
#13
Carter 2.0
Originally Posted by Siete1991
how come no one checks out my question that not cool man. j/k but seriously i really need those gaskets
Siete, What everybody is telling you is that up at the top of the page is a thing called 2nd Gen Archives. The SECOND thread in that section is a post from Karack called "13B rebuild kit" All the info you need is already posted right there. Three pages long of places part numbers and prices even. All you need to do is tap into the resources already provided to you in this forum.
Read the archives......All of them
Read the FAQ....twice.
After that use if your answers are not found then use the search button located on the tool bar.
IF you don't see the answers after you search THEN Post a question. Maybe you found something new and you'll have 57 replies in 2.3 minutes
Have fun
#14
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Go to MAZDATRIX.COM and buy the seals/gaskets from them. Buy only factory Mazda parts. Only rebuild using new apex seals.
Or buy factory Mazda parts from your local dealer.
http://www.mazdatrix.com/
Or buy factory Mazda parts from your local dealer.
http://www.mazdatrix.com/
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM