Clutch Master Push Rod Qustion
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Jun 2010
Location: North-East Ohio
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Clutch Master Push Rod Qustion
My clutch pedal felt like crap, being very brake pedal like and having engagement point always on bottom no matter what. Decided to pull the master and the push rod, turns out somebody who did a 5speed swap on my car decided it would be a good idea to weld a bolt to what seems like a brake master push rod, now this contraption is welded crooked and most likely not even the right length. I cannot find the rod for sale at a parts store so I decided to make my own out of a SINGLE piece of metal, or if someone has one they want to sell.
I would like to find out the length of the stock clutch push rod, or if someone has one for sale.
Thank you!
I would like to find out the length of the stock clutch push rod, or if someone has one for sale.
Thank you!
#6
Law Breaker
Join Date: Oct 2005
Location: S.F. Bay Area, California 510
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Are you talking about the clutch pedal rod? The piece that is attached to the pedal assembly, if so that is likely something you will not find from a auto parts store. Better chance going to a dealership or hit up the for sale section and get one from a car being parted out rather than making your own.
Trending Topics
#9
Full Member
Thread Starter
iTrader: (3)
Join Date: Jun 2010
Location: North-East Ohio
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Another rx7 owner said his did come with the rod, Ill have to see when the master gets here, I need a new on anyway. If it doesn't come with one I would really like to have an original part, dont want to butcher another master
#11
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
If that rod is the one that attaches to the clutch pedal and has an adjustment nut on it,That part is about 8 bucks from Mazda.
I got one about a year ago.
I got one about a year ago.
#13
Full Member
Thread Starter
iTrader: (3)
Join Date: Jun 2010
Location: North-East Ohio
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so here's a conclusion to this thread for people who will stumble upon it later;
Clutch masters do not come with the pushrod that attaches to the pedal assembly
The rod can be purchased from Mazda Dealer for around 5$
Clutch masters do not come with the pushrod that attaches to the pedal assembly
The rod can be purchased from Mazda Dealer for around 5$
#15
Lacks Ample Funds
iTrader: (1)
I'm gonna bring this back from the dead, but better than starting a whole new thread. Does anyone have the Mazda PN for the master cylinder rod? I have tried searching on the web and have not found any hits. I even went to several OE Mazda part finder pages with no luck.
#16
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
0727-41-131
under s4 parts manual
www.foxed.ca ..engine chassis
Section 4300-1 ,clutch and brake pedals, 1- H15
about page 180 of 195
under s4 parts manual
www.foxed.ca ..engine chassis
Section 4300-1 ,clutch and brake pedals, 1- H15
about page 180 of 195
Last edited by misterstyx69; 05-03-16 at 07:35 PM.
#17
Lacks Ample Funds
iTrader: (1)
Oh man, you killed it. I am so appreciative. I didn't know about that resource, but I have it bookmarked now.
Just in case someone comes across this, all parts for the pushrod are as follows.
Rod, Clutch: 0727-41-131
Fork/ Clutch Pedal: 0305-41-140
Clevis Pin: 0187-46-683
Pin Retainer: 9957-50-600
Just in case someone comes across this, all parts for the pushrod are as follows.
Rod, Clutch: 0727-41-131
Fork/ Clutch Pedal: 0305-41-140
Clevis Pin: 0187-46-683
Pin Retainer: 9957-50-600
The following users liked this post:
jumpa56 (01-03-20)
#18
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I actually had an old bent rod sittin about 2 feet away from me in a drawer..I kept it and put it back ..In the NEW wrapper.
So all the info on parts # was there,left on the tag.
BUT I double checked the parts manual just to be sure.
I bought a paper version years ago..so I have that as "back up"..heh!
* remember that rod is the adjustable rod on the Master.. that is held onto the clutch pedal and slides into the master.
It is NOT the Slave push rod.(that goes from slave to clutch fork on The Transmission).
So all the info on parts # was there,left on the tag.
BUT I double checked the parts manual just to be sure.
I bought a paper version years ago..so I have that as "back up"..heh!
* remember that rod is the adjustable rod on the Master.. that is held onto the clutch pedal and slides into the master.
It is NOT the Slave push rod.(that goes from slave to clutch fork on The Transmission).
Last edited by misterstyx69; 05-04-16 at 05:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post