2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

clunking feedback through shifter

Thread Tools
 
Search this Thread
 
Old Jan 22, 2007 | 11:55 AM
  #1  
ohayou88's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (7)
 
Joined: Jun 2006
Posts: 961
Likes: 0
From: Oakland CALI!
clunking feedback through shifter

welo on the way to school i noticed clunk feedback through the shifter. this would happen every time i step on the gas. it doesnt happen when first start moving. but while moving if let off the gas and get back on i get the feedback. also i tend to get alot vibration through the seat and doors. i think its a bad ujoints and driveshaft but i wanted to make sure
Reply
Old Jan 22, 2007 | 12:27 PM
  #2  
mort2002's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jul 2003
Posts: 1,248
Likes: 0
From: Prosser Washington
i would geuss u-joints or diff mount.
Reply
Old Jan 22, 2007 | 12:58 PM
  #3  
zinx's Avatar
_________________________
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
Check lug nuts too, i've actually had this happen when a shop didn't tighten down the nut and the wheel was clunk back into the hub. Pretty scary.
Reply
Old Jan 22, 2007 | 01:06 PM
  #4  
ohayou88's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (7)
 
Joined: Jun 2006
Posts: 961
Likes: 0
From: Oakland CALI!
Originally Posted by zinx
Check lug nuts too, i've actually had this happen when a shop didn't tighten down the nut and the wheel was clunk back into the hub. Pretty scary.
Whoa thats pretty wierd. I'll be sure the check that. The sound is coming from the shifter area and as i was coming back on the freeway when i left off the gas a terrible vibration and sound came from the middle of the car.
Reply
Old Jan 22, 2007 | 01:14 PM
  #5  
Russo's Avatar
Official Glass Tech
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 271
Likes: 0
From: Raceland, La
did you put some new or brass shifter bushings in?
Reply
Old Jan 22, 2007 | 01:22 PM
  #6  
ohayou88's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (7)
 
Joined: Jun 2006
Posts: 961
Likes: 0
From: Oakland CALI!
nope. I've done nothing to the shifter
Reply
Old Jan 22, 2007 | 03:58 PM
  #7  
007fc's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Oct 2006
Posts: 123
Likes: 3
From: south jersey
Samething Was Happining To Me. It Is Most Likely Your Diff Front Mount. That Was My Problem. That Mount Is Only A Dealer Part And It Will Cast Me About $142 And Thats With My Dealert Discount. Regular Price Was Like $177.
Reply
Old Jan 22, 2007 | 06:19 PM
  #8  
staticguitar313's Avatar
R.I.P. Icemark
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Sep 2004
Posts: 4,229
Likes: 1
From: gilbert, arizona
diff mounts
trans mounts
u-joints will come with massive noise and constant, speed depenadant vibration so its not likely.
Reply
Old Jan 22, 2007 | 07:12 PM
  #9  
ohayou88's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (7)
 
Joined: Jun 2006
Posts: 961
Likes: 0
From: Oakland CALI!
yea just replaced the transmounts like a month ago. So im gonna have to get it checked out to see if its the diff mount or u joints.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM




All times are GMT -5. The time now is 09:41 AM.