check connector
09-25-09, 10:13 AM
#1
Full Member
Thread Starter
Join Date: Jan 2008
Location: idaho
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
check connector
the check connector that you jump to set the timing,mixture,etc.. would you jump ths wire on first start when ALL componants are from different donors cars?
not one sensor is from the same purchase.
not one sensor is from the same purchase.
09-25-09, 01:43 PM
#2
If I deciphered your question correctly...
The initial set connector is there to disable ECU feedback when adjusting idle, mixture, etc... Having used sensors from other RX7s has nothing to do with it, and there is no need to jump the connector on a first-time start up, unless planning to make adjustments.
The initial set connector is there to disable ECU feedback when adjusting idle, mixture, etc... Having used sensors from other RX7s has nothing to do with it, and there is no need to jump the connector on a first-time start up, unless planning to make adjustments.
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM