Charging System Wriring Question
#2
Rotary Enthusiast
The alt wire should actually go through the 80A or 100A fuse in the engine fuse box because that fuse box actually servers as a buss for the 30A EGI, 30A Head, 60A ABS, 60A BTN and 30A Retractor circuits.
What you've done would still work provided that you didn't remove the other with that runs from the positive battery terminal to the other side of the 80A or 100A fuse. The only downside with what you've done is that the alt output is unfused.
What you've done would still work provided that you didn't remove the other with that runs from the positive battery terminal to the other side of the 80A or 100A fuse. The only downside with what you've done is that the alt output is unfused.
Last edited by Hot_Dog; 02-15-20 at 08:34 AM.
The following users liked this post:
freq (02-18-20)
#3
Junior Member
You could add an 80amp fuse from a car audio kit, just go to a local car audio shop and pickup a barrel style or flat style one and add it inline for safety
The following users liked this post:
freq (02-18-20)
Thread
Thread Starter
Forum
Replies
Last Post
12abridgeport
3rd Generation Specific (1993-2002)
0
08-17-16 09:23 AM
Dilandau
2nd Generation Non-Technical and pictures
1
05-27-09 10:38 AM
ddkkww888
3rd Generation Specific (1993-2002)
5
01-11-07 06:38 PM
twistedriver
2nd Generation Specific (1986-1992)
10
09-18-03 01:16 PM