CAS which side wiring harness ?
Thread Starter
Rotary Freak
Joined: Dec 2001
Posts: 2,941
Likes: 1
From: sandiego, ca
CAS which side wiring harness ?
I have a completly hacked wiring harness with CAT5 computer cable to the CAS...Im wondering what side of the wiring harness this is suppose to come from ?
The ECU/Fuel side or the Headlight/Dash side ?
The ECU/Fuel side or the Headlight/Dash side ?
Lives on the Forum
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
on an '88, anyway, the CAS and BAC wiring bundle together, then run into a larger bundle that runs across the forward upper engine, just behind the alternator, to the right side of the engine...also joining in on the fun are the primary injectors wiring, port and switching solenoid valves (on the ACV), alternator back plug, etc...short answer is, the BUNDLE ON THE RIGHT SIDE of the engine, call it ECU side, if you wish...
Originally posted by WAYNE88N/A
on an '88, anyway, the CAS and BAC wiring bundle together, then run into a larger bundle that runs across the forward upper engine, just behind the alternator, to the right side of the engine...also joining in on the fun are the primary injectors wiring, port and switching solenoid valves (on the ACV), alternator back plug, etc...short answer is, the BUNDLE ON THE RIGHT SIDE of the engine, call it ECU side, if you wish...
on an '88, anyway, the CAS and BAC wiring bundle together, then run into a larger bundle that runs across the forward upper engine, just behind the alternator, to the right side of the engine...also joining in on the fun are the primary injectors wiring, port and switching solenoid valves (on the ACV), alternator back plug, etc...short answer is, the BUNDLE ON THE RIGHT SIDE of the engine, call it ECU side, if you wish...
The BAC/ACV/ASV/Injectors/Water temp sensor/Knock sensor is on the EFI side.
The CAS/Oil sensor/starter/Alternator ring terminal is on the Main harness/driver side.
On NA's the Alternator plug goes to the EFI passenger side. Then there is the side ring terminal which is on the Main Harness Drivers side.
On Turbo models the Alternator wiring is all on the Main harness side.
Lives on the Forum
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
hmmm...very interesting...now that I think about it, the CAS bundle goes into the same harness as the alternator charging cable, right? Aw sh*t, I'm all confused now, and I just played with this stuff yesterday!!!edit- sorry, von, delete my earlier BS...
Last edited by WAYNE88N/A; Apr 20, 2004 at 06:48 PM.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
MoTeC
5
Sep 10, 2015 07:58 PM
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM