2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Car in shop now, Transmission questions!

Thread Tools
 
Search this Thread
 
Old 03-22-02, 09:15 AM
  #1  
Full Member

Thread Starter
 
Deathbots's Avatar
 
Join Date: Jul 2001
Location: Central Illinois
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Car in shop now, Transmission questions!

OK so my 86 GXL is in the shop. The trans had to be rebuilt, and after it was rebuilt it started making an awful lot of noise. luckily for me, it's under warranty and the garage is honoring that warranty.

Anyway, they want to start all over with a new trans. Not new necessarily, just a different transmission. I know that later transmissions were much stronger (89+, say a GTU model)

Will one of those fit on my car with no modifications?

if so, I can tell the shop to look for one of those and I could get rid of the notoriously weak 86 NA trans.
Old 03-22-02, 10:57 AM
  #2  
Banned. I got OWNED!!!

 
hypntyz7's Avatar
 
Join Date: Jul 2001
Location: usa
Posts: 3,052
Likes: 0
Received 1 Like on 1 Post
The 89-91 5sp will bolt up no problems as long as you have the 89-91 crossmember to go with it.

FWIW I have one with a bad 5th gear synchro Ill sell for $100. It drove adn run great other than grinding each shift to 5th.

THe 89-91 trans. is not any stronger than the 86-8 AFAIK.,
Old 03-22-02, 11:02 AM
  #3  
Moderator

iTrader: (7)
 
hIGGI's Avatar
 
Join Date: Feb 2001
Location: Czech Republic [www.rx7cz.net]
Posts: 4,985
Received 17 Likes on 12 Posts
TII trannys are stronger, but to use it on NA you would need TII flywheel and clutch....that setup is in my car right now, NA engine, TII clutch, tranny, diff etc...
Old 03-22-02, 11:41 AM
  #4  
Full Member

Thread Starter
 
Deathbots's Avatar
 
Join Date: Jul 2001
Location: Central Illinois
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the responses-

hypntyz7:

Unfortunately for you the trans shop is replacing everything under warranty. So I pay nothing!

higgi: I don't have deep enough pockets for a TII flywheel and clutch. oh well!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
02-28-18 11:27 AM
Professorpeanutrx7
New Member RX-7 Technical
5
08-15-15 01:38 PM
pjr
3rd Generation Specific (1993-2002)
8
08-12-15 12:22 PM



Quick Reply: Car in shop now, Transmission questions!



All times are GMT -5. The time now is 05:40 AM.