cant take off the axle
#1
bone stock
Thread Starter
iTrader: (8)
Join Date: Apr 2007
Location: SOCAL
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
cant take off the axle
hey so i'm taking out my open diff for my gxl lsd. ive taken everything off and the passenger side axle just wont come off! the driver side slipped right out. but now im having difficulties with the passenger side one. any tips or tricks on taking it out? it gets really close to coming off!!! please help
#3
Canadian Boost
iTrader: (3)
Join Date: Nov 2005
Location: Ottawa, Canada
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
are you taking it off the hub side or the diff side?
hub side, just use and axle puller http://greatnecksaw.com/images/produ...view/27032.jpg
i think u can rent one probly from autozone or something
if its the diff side, i used a bent pry-bar, gives you abit of a hassle but it will come off, or drop the diff first, support it with a jack and then slide the axle off
hub side, just use and axle puller http://greatnecksaw.com/images/produ...view/27032.jpg
i think u can rent one probly from autozone or something
if its the diff side, i used a bent pry-bar, gives you abit of a hassle but it will come off, or drop the diff first, support it with a jack and then slide the axle off
#5
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Ok,..if it in between the Differential stub and the Half shaft itself,get a Screwdriver or something to Pry in between the Axle and Stub.Once you see enough of a crack there,put a crowbar or a Chisel in there and either Pry or hit it apart.
Now,If it is the Axle Hub Side,where that 34mm nut was,then put the Nut back on Flush with the axle(so that threads don't stick out or the nut is Damaged).Then get a Chunk of 2X4 and put it up against the end of the axle.HIT the Damn thing,and it should Release from the spline...there ya go,,Out and undamaged.
Now,If it is the Axle Hub Side,where that 34mm nut was,then put the Nut back on Flush with the axle(so that threads don't stick out or the nut is Damaged).Then get a Chunk of 2X4 and put it up against the end of the axle.HIT the Damn thing,and it should Release from the spline...there ya go,,Out and undamaged.
#6
bone stock
Thread Starter
iTrader: (8)
Join Date: Apr 2007
Location: SOCAL
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
k cool thanks for the help guys. i was trying to use a flat head to pry it off but ill get something bigger tomorrow. weird how the driver side just slipped out and the passenger side is being such a pain
Thread
Thread Starter
Forum
Replies
Last Post