Can someone look at this PIC and identify a part for me?
11-08-01, 01:54 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: Surrey, B.C. CANADA
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Can someone look at this PIC and identify a part for me?
http://k2rd.freeservers.com/cgi-bin/.../TPS/tset1.jpg
That SPRING located right beneath the yellow drawn in ARROW, is that the one to REMOVE so that when you do the TPS adjustment, its not affected by the THERMOWAX system?
That SPRING located right beneath the yellow drawn in ARROW, is that the one to REMOVE so that when you do the TPS adjustment, its not affected by the THERMOWAX system?
Last edited by ROSHX7; 11-08-01 at 02:01 AM.
11-08-01, 06:47 AM
#3
Rotary Freak
Okay.....
You need to get the factory service manual off the web.
the '88 maunal will be fine for now....
http://www.iluvmyrx7.com/Technical_I...ice_manual.htm
BUT the screw you speak of is the master set screw.
Dont mess with it.
The spring is also not to be messed with.
Its the return spring.
The manual will show you how to adjust the TPS properly.
Dont go on the heresay you get from everyone until you read the right way first.
Then compare the shortcut advice you get to that in the manual.
when in doubt, RTFM.
the '88 maunal will be fine for now....
http://www.iluvmyrx7.com/Technical_I...ice_manual.htm
BUT the screw you speak of is the master set screw.
Dont mess with it.
The spring is also not to be messed with.
Its the return spring.
The manual will show you how to adjust the TPS properly.
Dont go on the heresay you get from everyone until you read the right way first.
Then compare the shortcut advice you get to that in the manual.
when in doubt, RTFM.
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM