So I took all the lines out and the compressor. There is this line which connected to the radiator. After I took that line off, what should I use to block the hole on the radiator? thanks

 

Recheck your connections.. There is NO line from the compressor to the radiator.

There are either three or four hoses connected to the radiator.
Upper and lower main hoses. Heater core line (Joined with the lower hose.) and maybe an overflow near the radiator cap.


The A/C compressor is hooked up to the condenser coil that is in front of the radiator.
You're supposed to remove that if you're removing the A/C.

Then if you're doing it properly, you're also supposed to remove the dashboard and pull the evaporator core that's next to the blower.

 

Yeah, i think the condenser coil is what I am talking about, it's located at top right of the radiator correct?

Do I have to pull the evaporator core? It's a lot of work to remove the dashboard?

thanks