Bypass the wiring of the starter
#1
Bypass the wiring of the starter
I need help : my car wont start.
It was automatic, I've changed it for standard. Everything was ok untill last saturday.
It does the same thing as when you try to start your engine without pushing the clutch : nothing, not even a "click"
So I want to bypass the usual wiring to the starter and use an independant button.
This is where I need help : I don't really know how ??? I'm ok with mecanic, but not with electicity. It would be very nice of you to explain precisely what to do, what cable I should use, things I must be carefull with, etc...
Thanks in advance !
It was automatic, I've changed it for standard. Everything was ok untill last saturday.
It does the same thing as when you try to start your engine without pushing the clutch : nothing, not even a "click"
So I want to bypass the usual wiring to the starter and use an independant button.
This is where I need help : I don't really know how ??? I'm ok with mecanic, but not with electicity. It would be very nice of you to explain precisely what to do, what cable I should use, things I must be carefull with, etc...
Thanks in advance !
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
I'd start by testing the clutch interlock switch.
Backprobe it with an ohmeter or continuity tester & work the pedal.
Some spray contact cleaner there & in the ignition switch may help
Backprobe it with an ohmeter or continuity tester & work the pedal.
Some spray contact cleaner there & in the ignition switch may help
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM