>>>>buying RX7 <<<
>>>>buying RX7 <<<
Joined: Jun 2001
Posts: 3,106
Likes: 0
From: London, Ontario, Canada
Full Member
Joined: Feb 2004
Posts: 86
Likes: 0
From: Georgia
what year? stick or auto? listen to the idle, rpm's when warmed up should be at about 700. take condition into consideraton when talking $. i live in jax, if you would like a second opinion, i could ride over. do you know a lot about any other vehicles? some principles are the same. check fluids,take it out for a good test drive, and let it cool down and check the fluids (oil)
Trending Topics
Banned. I got OWNED!!!
Joined: Nov 2002
Posts: 312
Likes: 0
From: San Jose, CA
make sure the car is cold when you go check it out........you need this in order to see if it has a coolant leak.....on star-up the car will have white smoke coming out of the exhaust if it has a coolant leak.........if the car is warm then the broken coolant seal will expand therefore not allowing for coolant to enter...... If it is warm when you get there then tell him you will return tomorrow when it is cold.....
Rotary Freak
Joined: Jun 2003
Posts: 1,709
Likes: 0
From: Metro Detroit
Re: >>>>buying RX7 <<<
Originally posted by drew18z
i am buying an RX7 would like to know what problems i sould look for and things i should check before purchesing it ?
i am buying an RX7 would like to know what problems i sould look for and things i should check before purchesing it ?
Mountain Rotary Mod
Joined: Nov 2003
Posts: 2,411
Likes: 0
From: Freaking Poland!!
I don't think 3750 is too much, as long as it's in good condition. Check the normal things, oil in the coolant, make sure it fires. If you can get it, do a compression check. Check everything like it's a normal car. Rust is bad.
Joined: Jun 2001
Posts: 3,106
Likes: 0
From: London, Ontario, Canada
Originally posted by CompuBob
Aaron Cake has a nice writeup on buying a RX-7 and everything you should look out for, I cant seem to find the link, anyone care to post it?
Aaron Cake has a nice writeup on buying a RX-7 and everything you should look out for, I cant seem to find the link, anyone care to post it?
CVPI rules the road
Joined: Jan 2004
Posts: 576
Likes: 0
From: Gainesville, FL
make sure you check the clutch master and slave cylinders...i had to replace mine within 2 months of ownership...the guy never drove it, so it sat there and rotted out the seals.
if the engine's bad, you could always put the 4-banger from your mustang in it!
if the engine's bad, you could always put the 4-banger from your mustang in it!
Thread
Thread Starter
Forum
Replies
Last Post
FDNewbie
3rd Generation Specific (1993-2002)
161
Sep 6, 2015 11:10 AM
