Im not sure Wtf this Fill Conntion is made of... But all i did was lean my Hose on it
and the Stupid thing Cracked.
Is there any EZ way to Fix this? or to Bypass that Fillneck all together with a Bypass and or if so where can i get one. OR better yet. Wth is this thing calld.
Ive been taking Crazy Guess's at it. only to find out people at Autozone make me Feel smart By Making Even stupider Guess's
and if anyone knows what this Pos Cap Connector thing is made out of id like to know.
TY for your time

 

oh the nipple?

 

Did you break the part that is bolted on top that the cap goes on or did you break the longer neck under it that covers the thermostat? Either way... you can replace them both with relative ease.

http://rx7world.com.phtemp.com/catal...4_products.htm

 

Man.. that is a BUSY engine bay.

 

ha yea it is! Are those all just precautionary grounds to the top of the intake manifold? If you ask me, it seems like a little over kill. Goodluck on the nipple replacement.... hah, never thought i'd ever be saying that.

 

omg i didnt even notice that scared of a little hesitation are u lol

 

bigger nipples ftw

 

That is a grounding kit.

He probably broke the plastic thing that bolts on, you need a replacement and the o-ring for it.

http://www.mazdatrix.com/b8.htm

Big nipples ftw?

 

well as long as they dont look like a plate and you cant eat off them your good lol

 

As long is it doesnt look like theyve been half dipped in pink colored chocolate

I think this is a little off topic now

 

Just make a block-off plate and block it off (that's what I did cuz' I couldn't find a used one and I couldn't wait for a new one).

 

i have like three of those, PM me if your interested. I bought em new from mazdatrix and its mad expensive. I feel ure pain, i leaned on mines 2 times before i learned NOT TO lol

Jason NYC

 

^^^you have three nipples?? lol jk

 

Goddamn at the ground wires I cant say much, I have a ground system too, but my wires are tucked and sort of hidden.

Nipple question is answered so Ill end it there

 

i do believe he means the whole housing cracked if it is on an S5 model(could be a generic picture), since it is plastic after all. all you can do is replace the whole thing, there is no repair you can do to it that is safe or reliable.

unless you are just referring to the filler housing, go to the dealership and pick up an FD filler housing as it is aluminum and only costs about $30 and will eliminate the same from happening later down the road.

 

Ah. well the Ground kit Sence so Meny have Aw'd over. I installd To correct Some retartid A/F problems. It also Fixed alot more then that.
Wipers, Stutter, and over all Smoother Pickup. Donno why that is but im not gooing to Poke at it.
And Yes the thing that Cap Screws Onto Crackd. Not the Entire thing

 

Im not sure why But i couldent EDIT my post.
But to say im aware Of the Last Sentence.

 

well after not wanting to wait on shipping and Shopping at the Scrap Yard.
I came home and Relized i had stuff to fix the Problem. Right in front of my Litrally.
I took the Cap off the Top and the Cap Housing, and Removed the Bottum Rubber of the Cap.
I then Found some scrap metail laying around and it went Somthing like this.

I put silicon over the fill hole, And put the small Rubber peace over it.
Then aplyd Silicon over the Top of the cap Rubber, then Put on the Scrap Metail.
After all that I put on the Cap housing over it to Hold it inplace.
Looks somthing like this

I testid it.
The line Holds Great Pressher with no Leaks.
Sorry about the typo's little over workd

 

o and i got REALLY board and sand'd down my Fillneck , primed it and Paintid it <.<
Dont ask why But i think it looks nice