Boost and A/F?
10-07-04, 11:29 AM
#1
Boost and A/F?
I am putting an 88turbo motor in my 86. I have an intake, 3 inch RD DP and exhaust, lightened flywheel and clutch and walbro fuel pump. what else do i need to do to not wreck this engine? i was thinking on running at 10psi, is that safe considering that i dont have an A/F controller or any way getting more fuel into the car, other than the fuel pump? Has anyone done it safely?
thanks,
jose
thanks,
jose
10-07-04, 12:37 PM
#3
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
You need to port the hell out of the wastegate, to include having a bigger flapper door put on it if you want to keep it at 10 PSI of boost with a 3 inch downpipe..
My TII ran mid-low 12's with the walbro, stock ecu and injectorsr @ 10 PSI, you should be fine as long as you keep it there!
My TII ran mid-low 12's with the walbro, stock ecu and injectorsr @ 10 PSI, you should be fine as long as you keep it there!
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM