2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Bogging at 1/4 Throttle an Not Building Boost?

Thread Tools
 
Search this Thread
 
Old Jan 8, 2007 | 04:30 PM
  #1  
TII_88's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 30
Likes: 0
From: Junction City, Kansas
Bogging at 1/4 Throttle an Not Building Boost?

Well I have an 88 Turbo II an since I got it it's not been wantin to build boost as far as the gauge reads an when the gas is pressed passed 1/4 throttle it boggs as if trying to die out but does not just kinda backfire's like it's try'n but just can't seem to do anything! But I can rev it to 8 grand while hold the gas at 1/4 but it takes a while? If Anyone could please give me an idea or sumthin let me know! And Could the TPS be a problem because mine was siezed up an I'm currently getting a new one to see if that makes a difference!
Reply
Old Jan 8, 2007 | 05:45 PM
  #2  
The Wankler's Avatar
FKITALL
iTrader: (14)
 
Joined: May 2004
Posts: 3,588
Likes: 2
From: Dublin Ca.
Sounds like it could be grounding problems. Ever do a engine swap or so? If the harness has ever been removed for a swap, chances are the grounding connections need to be cleaned. What rpm does it start? If you had a wideband you could tell if you are going lean.
Chris
Reply
Old Jan 8, 2007 | 06:07 PM
  #3  
91rx7ltd.'s Avatar
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2006
Posts: 67
Likes: 0
From: newjersy
Originally Posted by TII_88
Well I have an 88 Turbo II an since I got it it's not been wantin to build boost as far as the gauge reads an when the gas is pressed passed 1/4 throttle it boggs as if trying to die out but does not just kinda backfire's like it's try'n but just can't seem to do anything! But I can rev it to 8 grand while hold the gas at 1/4 but it takes a while? If Anyone could please give me an idea or sumthin let me know! And Could the TPS be a problem because mine was siezed up an I'm currently getting a new one to see if that makes a difference!
I have a 91 t2 and my check engine light is on because of the tps but ,I does not bogg and my boost is good.check the fuel pump,filter ,pressure and the boost control and also the turbo .you can also take the exsust off of the turbo because the cats can clog.
Reply
Old Jan 8, 2007 | 06:13 PM
  #4  
Russ-R's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2004
Posts: 226
Likes: 0
From: Georgia
sounds like fuel cut.........any mods? Do you have a FCD installed?
Reply
Old Jan 8, 2007 | 08:16 PM
  #5  
Sleeper69's Avatar
Full Member
Tenured Member: 20 Years
 
Joined: Nov 2003
Posts: 124
Likes: 0
From: Stillwater, Ok
Sounds to me like something to do with the MAF but thats just speculation. I would check to make sure its connected properly and that there are no leaks arround it. That and now to think of it a boost sensor is what shows your boost pressure so check that as well.
Reply
Old Jan 8, 2007 | 08:50 PM
  #6  
unW7WZ's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 372
Likes: 0
From: Houston
boost leak?
Reply
Old Jan 8, 2007 | 09:22 PM
  #7  
TII_88's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 30
Likes: 0
From: Junction City, Kansas
Thanks I'll check my fuel pump because the guy that had the car b4 me put a new one in,but what should i look for because I can hear it kickin on pretty loud b4 starting the car! And he also put in a new filter as well! I'll check for clogged lines tho! And my turbo has no shaft play and spins freely and u can hear the bypass valve release pressure after pressing the gas after about 4 grand! . .just won't let me push the gas past 1/4 or it'll bogg! . .
Reply
Old Jan 9, 2007 | 09:26 AM
  #8  
TII_88's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 30
Likes: 0
From: Junction City, Kansas
And also my MAF is only 3 months old I just got it! So I dunno if it could be defective or sumthin but yeah it might be a possibilty!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
sen2two
AEM EMS
9
Oct 23, 2015 07:51 PM




All times are GMT -5. The time now is 10:24 PM.