BNR Stage 1?
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: Canada
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
BNR Stage 1?
I just sent an email asking bryan about the BNR stage 2... but after a little bit of reading on the stage 1, I think I like it more for my application. Tell me what you guys think.
I have a 87 TII with a fresh reman (900 kms or so on it), 2x720cc secondaries, walbro 255, fcd, s-afc II, full 3" corksport exhaust, custom 3" intake, all emissions removed, twin scroll removed, running premix.
I noticed some oil in my intake after the turbo, so I'm guessing it's going out.
I like how the stage 1 uses the stock compressor housing so I can still use my tmic until I get an fmic. But do I have enough fuel for it? Also... everyone says to not run the stock turbo over 15psi... is it the same for the stage 1?
Thanks for any help.
I have a 87 TII with a fresh reman (900 kms or so on it), 2x720cc secondaries, walbro 255, fcd, s-afc II, full 3" corksport exhaust, custom 3" intake, all emissions removed, twin scroll removed, running premix.
I noticed some oil in my intake after the turbo, so I'm guessing it's going out.
I like how the stage 1 uses the stock compressor housing so I can still use my tmic until I get an fmic. But do I have enough fuel for it? Also... everyone says to not run the stock turbo over 15psi... is it the same for the stage 1?
Thanks for any help.
#4
Rotary Enthusiast
Join Date: Oct 2002
Location: houston
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
im gonna get stage 2...simply because i just feel liek that amount of power is perfect :p ....im looking to get a set up close to yours.....thats if i ever get my t2 LOL
#5
You can still use the stock top mount with a t04 compressor housing. No doubt, a front mount is better from a peformance standpoint. Physically, however, everything will bolt up just fine.
Trending Topics
#10
Rotary Enthusiast
Join Date: Oct 2002
Location: houston
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
#12
Originally posted by -Spool_TSI-
so 4x720 would be enough for as high as the stage 2 would take me?
so 4x720 would be enough for as high as the stage 2 would take me?
i've heard many things about BRN....where do i look to check out the specs?...someone please link me
205 640-1193
#14
T2 Noob.
Join Date: Jun 2003
Location: San Fran-Mateo
Posts: 1,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by apreludem
im gonna get stage 2...simply because i just feel liek that amount of power is perfect :p ....im looking to get a set up close to yours.....thats if i ever get my t2 LOL
im gonna get stage 2...simply because i just feel liek that amount of power is perfect :p ....im looking to get a set up close to yours.....thats if i ever get my t2 LOL
#15
Ahhhhhhhh hhh....
Join Date: May 2003
Location: www.wRongPeople.com
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fc3seeker
That turbo sits you right in the area of 300RWHP or so and that is great to have under the hood of a T2
That turbo sits you right in the area of 300RWHP or so and that is great to have under the hood of a T2
Last edited by Jaared; 06-13-04 at 09:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
matty
3rd Generation Specific (1993-2002)
40
10-06-15 09:13 PM