Block Off Plates and Boost Nipples
HAILERS
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Here's the way blockoff plates SHOULD be made but are not:
The three nipples need to be opposite the holes in the manifold as shown in the second jpg. And a gasket should be used. Home made gasket.
The three nipples need to be opposite the holes in the manifold as shown in the second jpg. And a gasket should be used. Home made gasket.
Last edited by HAILERS; Jan 25, 2008 at 09:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
