BLACK oil lines off the injectors.. SNAP! maybe alright..
01-08-02, 11:29 PM
#1
My cars louder than yours
Thread Starter
Join Date: Oct 2001
Location: Augusta, GA
Posts: 1,969
Likes: 0
Received 0 Likes
on
0 Posts
BLACK oil lines off the injectors.. SNAP! maybe alright..
Alright, i ran a search on this, and came up with some decent results, but i have an idea (everyone hold on,this may get messy, haha). I was looking through my Haynes manual, and it says the black ones are "Air Hoses" that to back to the dynamic chamber (the top manifold) and is the top one of the three in a row vertically. If that is the case, could i just replace the BLACK ones with regular tubing or vacume tubing? i know that the Petrol in the oil will eat through silicon and such, but, if its an "air hose" it shouldnt get oil corect? Please correct me if im wrong, just spittin ideas. Thanks all, i dont really want to spend damn 20 dollars for that **** or however much it is.
01-09-02, 01:21 AM
#4
Full Member
Join Date: Aug 2001
Location: la
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
this is probally no help but here goes
the 3 vertical vacuum hoses lead to ( left to right ) purge contol valve, the 2 and 3 on lead to a metal pipe then to the solennoid valves
???
their are no line on the injectors, do you mean oil nozzles? they have vacuum/air/ hoses that lead all 4 oil nozzle air and 2 to the block to a big pipe then right to the purge valve
i replace all my small vacuum hoses with silicone 7/16mm i think??
try going to the auto parts store that has a lot of silicone, autozone and kragen don't carry the correct sizes, I am still loking throw my workshop manual to find the specific size and material used.
the 3 vertical vacuum hoses lead to ( left to right ) purge contol valve, the 2 and 3 on lead to a metal pipe then to the solennoid valves
black oil lines off the injectors
their are no line on the injectors, do you mean oil nozzles? they have vacuum/air/ hoses that lead all 4 oil nozzle air and 2 to the block to a big pipe then right to the purge valve
i replace all my small vacuum hoses with silicone 7/16mm i think??
try going to the auto parts store that has a lot of silicone, autozone and kragen don't carry the correct sizes, I am still loking throw my workshop manual to find the specific size and material used.
Thread
Thread Starter
Forum
Replies
Last Post