Well as I said before in this thread, my RX-7 is nearly perfect.

A while back, my right side FTP fell out due to the plastic behind and cracking and the bolt/nut rusting somewhat.

I just a "new" used one from a RX-7 store around here for $10. I want to put both of them back in NOT using the stock method as they will surely fall out again.

Anyone got any ideas for mounting these short of JB welding the sumbitch's in there!?

Thanks

 

oh c'mon.. I know this has happened to other people before... c'mon..

 

I never had a problem...If holes enlarged, put a piece of thin copper wire in hole before you put the bolt in.

 

Well, I took the advice of the guy at the RX-7 shop. He said to use silicon (like caulking) and just bead those mother ******* in. I did a *pretty* neat job of it ( you can kinda see it on the drivers side one.. ) and they're holding pretty well after 15 mins of drying.

Cure time is 2 hrs so we'll see. He said silicon will hold em in FOREVER. I took a look at my shower, still holding strong and mildew free (for the most part), meh I guess this'll hold.

 

super glue eh? I think I'll put a thin coating of that stuff on when it's dry just to be sure

 

Looks as though they will never come out!!!!!!!!!

 

That's the plan

 

Use white latex caulk make shure you slop it on the lense. It will look ****.

 

Hey Dre 2000 can you get me two Ftp lens for that price at your Rx-7 Store..If so Pm me... I need both of them and I will have all lights and lens...If someone else has some extras how bout hooking me up...Thanks guys...

 

Yeah they're all $10/each + tax @ 6.5%.

I think I got the best one out of the bunch. Lots are old and faded turning yellowish... OH, and they don't have any bolts/nuts so the only way to install them is use adhesive (like silicon or crazy glue).

PM if you're still interested .