Best fix for a brass filler neck crack.
#26
Sharp Claws
iTrader: (30)
well yes, the '74 spec housings will work with any iron before 1986 and after 2003. they're not exactly picky but they do still require a coolant seal.. the housings have air diverter banjos that bolt in from the bottom of the housing and then the sleeve is a press fit into the housing. not super complicated or different but the exhaust is VERY small, smaller than even the 12A ports.
#27
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
If that rad doesn't hold,get a hold of Southside ***.
we just had a chat (Canada to Alabama) on the phone..heh.
He's got a brass rad.
I was gonna mention it earlier but you went and fixed er up.
Anyways now you have a "back up plan" if things don't work out for ya!
we just had a chat (Canada to Alabama) on the phone..heh.
He's got a brass rad.
I was gonna mention it earlier but you went and fixed er up.
Anyways now you have a "back up plan" if things don't work out for ya!
#28
Karack, are they any different other than that? They are very small but that's nothing a decent port job couldn't fix! I also have a D weight and an E weight rotor if anyone is interested. I just need these parts out of my shed so I can work on other things in it. $600 takes EVERYTHING from both motors all the way down to thru bolts and completed oil control rings.
Misterstyx, thank you, and I will keep that in mind.
Misterstyx, thank you, and I will keep that in mind.
Thread
Thread Starter
Forum
Replies
Last Post