2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Bad U-Joint?

Thread Tools
 
Search this Thread
 
Old Dec 6, 2008 | 05:54 AM
  #1  
Skoobz's Avatar
Thread Starter
Rotary Head
 
Joined: Jul 2007
Posts: 13
Likes: 0
From: bay area
CA Bad U-Joint?

So the last few days of driving my Rx ('87 NA Manual) ive felt a little rumbling in the back end, i thought nothing of it, rough roads, shocks going out ect. Then tonight on my way to work, my Rx starts shuddering at speed. At slow speeds its very un-noticable but at about 40 mph up to 80mph i feel like im in one of those massage chairs in Walmart. When I got to work I pulled out my trusty iPhone, and did some searching on the forum and from what it's doing and how it sounds (like a small aircraft getting ready to take off in the back of my car) im guessing its my U-Joint/s.

So now my question is I have a S4 NA manual and when I bought the car, the guy I got it from gave me a Turbo Trans.and all the Trans components, a Turbo Driveshaft and a Turbo rear end but i dont know if they are from an S4 or an S5, so will an S5 driveshaft and rear end fit on my S4? and how can I tell if I have an S4 or S5 trans? (Will post pix in the A.M. if necassary.) Also how long should/would it take for me, a fairly profecent mechanic to swap the Trans?

Thanks in advance guys. Sorry for the wording of the post doesnt make much sense its 4am and work was insane tonight.
Reply
Old Dec 6, 2008 | 11:00 AM
  #2  
NakesFC's Avatar
Full Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Feb 2008
Posts: 136
Likes: 0
From: Dallas
s4 and s5 driveshafts will both work...look for one on the forum for real cheap, turbo drive shaft will not work and you will need COMPLETE turbo drive train to do the swap...
Reply
Old Dec 6, 2008 | 01:06 PM
  #3  
Skoobz's Avatar
Thread Starter
Rotary Head
 
Joined: Jul 2007
Posts: 13
Likes: 0
From: bay area
Got it, Can't find any auto driveshafts on the for sale/wanted baord, Anyone know of any place I can get one cheaper than on mazdatrix.com? I checked ebay but is there somewhere better?
Reply
Old Dec 6, 2008 | 04:41 PM
  #4  
YBNORML's Avatar
That's notta sin.
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 132
Likes: 0
From: Topeka, KS
I had a machine shop install replaceable u-joints for $150 four years ago.
Reply
Old Dec 6, 2008 | 05:35 PM
  #5  
NakesFC's Avatar
Full Member
Tenured Member 05 Years
iTrader: (2)
 
Joined: Feb 2008
Posts: 136
Likes: 0
From: Dallas
yeah finding an auto drive shaft will be tough, do you have any junkyards near you? You may try a transmission shop and see if the can make one for you like the previous poster said.
Reply
Old Dec 6, 2008 | 07:42 PM
  #6  
Skoobz's Avatar
Thread Starter
Rotary Head
 
Joined: Jul 2007
Posts: 13
Likes: 0
From: bay area
Drive Shaft I got off Ebay Hopefully this will work...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Logan Reinisch
General Rotary Tech Support
44
Sep 17, 2018 12:20 PM
joel(PA)
Group Buy & Product Dev. FD RX-7
8
Oct 4, 2015 06:07 PM
Jmolina0163
1st Generation Specific (1979-1985)
10
Oct 3, 2015 10:04 AM
series1rx7
1st Generation Specific (1979-1985)
3
Sep 27, 2015 05:46 PM




All times are GMT -5. The time now is 03:59 AM.