autometer fuel press gauge ?
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: Salt Lake City
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
autometer fuel press gauge ?
i was wondering if anyone has an aftermarket electrical fuel pressure guage. where and how does it hook up. i looked at install instructions on autometers site but its so vague. thanks in advance.
#2
Lives on the Forum
Closest to the FPR but upstream from the FPR, not after it.
Easiest would be to find an adapter to fit between the primary and secondary fuel rails, if you're still running the stock series set-up.
If you're running an aftermarket FPR, most have a 1/8"NPT hole for it.
Else, if you want to getto-rig it, you can drill and tap the banjo bolt on the opposite side of the FPR (if you have Zenki fuel rails) for the 1/8"NPT sensor.
-Ted
Easiest would be to find an adapter to fit between the primary and secondary fuel rails, if you're still running the stock series set-up.
If you're running an aftermarket FPR, most have a 1/8"NPT hole for it.
Else, if you want to getto-rig it, you can drill and tap the banjo bolt on the opposite side of the FPR (if you have Zenki fuel rails) for the 1/8"NPT sensor.
-Ted
#4
Lives on the Forum
Originally Posted by dothacker
so, which Fuel Pressure Regulator do u suggest?
The Aeromotive units are okay too since it's similar in design.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post