2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

automatic to stick

Thread Tools
 
Search this Thread
 
Old Nov 15, 2007 | 01:35 AM
  #1  
new2mazda's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2007
Posts: 517
Likes: 0
From: Englewood/Dayton Ohio
automatic to stick

how hard is it to swap an auto with a manual tranny? found a nice rx7 its automatic. planning on buying a complete turbo swap with 5 sped tranny. how hard would it be to switch the two?
Reply
Old Nov 15, 2007 | 03:39 AM
  #2  
tweaked's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jul 2001
Posts: 948
Likes: 1
From: Memphis, TN
You have to build new mounts for the transmission cross member. The rest of the stuff is easy. I don't know why they couldn't use the same cross member, but they didn't.
Reply
Old Nov 15, 2007 | 04:24 AM
  #3  
SouthSideSlider's Avatar
whats a Turbo V?
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 1,215
Likes: 0
From: Goose Creek, SC
the swap is easy and strait forward but once done their was a plug on the auto tranni it has 3 prongs you need to cut the head on and hook 2 of the wires together to get ird of the nutral safty switch so you can crank the car. the 3rd wire is your reversie lights mjust PM me later for more info i have just completed this swap less than 24hours ago.
Reply
Old Nov 15, 2007 | 02:19 PM
  #4  
iLikeEatPoo's Avatar
The Great Dick
Tenured Member 10 Years
iTrader: (6)
 
Joined: Nov 2007
Posts: 3,830
Likes: 1
From: America
It shouldn't be too hard. My friend did his auto to manual on his S14 with just him and one other guy in 2 days 6 hours a day.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sethix
2nd Generation Specific (1986-1992)
6
Nov 3, 2017 11:48 PM
Turblown
Single Turbo RX-7's
1
Sep 30, 2015 05:58 PM
Barry_Beef
General Rotary Tech Support
0
Sep 22, 2015 06:36 PM




All times are GMT -5. The time now is 01:23 PM.