silverman182

hey guys wondering what would i need in order to swap a automatic transmission to a 5speed transmission is it hard to do??? what parts will i need?? thanks everyone-

Go DIAF

Read the FAQs and search... You didn't bother doing that did ya?

RX7Tuner.

This is just off the top of my head. There might be more but I think this is just aout everything. The prices are obviously an average cost. There are deals out there...
I would buy everything used except the seals for the tranny, clutch (and assembly), and have the flywheel turned.

Required:

Low mileage tranny- $200
Input and Output seals for your used tranny - $15
Flywheel / counterweight - $50
Shifter - $15 (With Bushings)
Shifter Surround with boot - $20
Clutch, pressure plate, throwout bearing, and pilot bearing- Anywhere from $150 to $350
Clutch Master Cylinder - $40
Clutch Master Cylinder Lines - $15
Slave Cylinder - $25
Pedal Assembly - $40
Mounting Brackets that need to be welded in - $45
Driveshaft - $45

Not Required but a good idea:
Manual Guage Cluster - $25
4:10 or higher rear end - $Varies a lot

Hope this helps,
Brian

13b_4_me

deng thats quit a bit lolz just wondering bc i might end up buying another rx7 wit around 70k original miles and i have a parts car that is 5spd so basically cant i just transfer everything to the automatic? thanks

Omixeo

iTrader: (1)

Go into the archives, its at the top of this section. Theres a write-up in there for this.

eff_three_see_es

iTrader: (11)

all you need is to go out and buy a five speed fc and ditch the auto. lol

Kenteth

It cost me just under $1k, but thats because i broke everything possible in my adventure. Good planning can get it around $500.

Sideways7

iTrader: (7)

http://www.rotaryresurrection.com/2n...to_5speed.html

rotarybeat1287

iTrader: (16)

thats the best f-ing description of a swap right there. the bracket thing w/ pics helped a lot. thats what i was confused on. damn good resource right there. thanks for the link.
-allen