Deleted

 

...
weight , pics of their work

1600 seems a bit too high for all the cheap bastard (includes me) on here

 

you know if you have the measurements for the kit you could easaly make one for about 100 bucks in parts excluding the moters if its not a manual dor kit

the motered ones i was told would probably cost 50-100 bucks for the moters depending on the quality of them

 

yep, i could probably do it myself for 1/3 that or less but that is alot of work and math and my head hurts already... good luck finding 2 or 3 people let alone 10, sorry to sound negative but i doubt you will find enough people.


you would want hydraulic struts, the struts would be easy to locate/order and replace but i doubt you could make a decent setup for less than $300

 

Your all probably right,I have been tring to do something with my doors for years,but have yet seen any one do it with a fc,fds out the ying yang.I personaly would love to put suicide doors on.Everyone is doing lambo---or better yet a gull wing set up would be focking cool

 

a gull wing would probably be easier but it might require some extra roof stiffening, it would be easier to set the door up but more work to lighten the door and stiffen/support the roof, especially with a sunroof it may be a bit of work but it would look original.

 

 

^hahhahahHAHhah

 

I bet I could snap those off

I'm surprised the doors don't shear off due to their own weight.

 

I found the FC door kit in Japan for about 900 Canadian, which is about 700 US... So 1600 is just way to high for that sorta thing...Max

 

All group buys must be approved by the forum admins.

Please contact Jason or BOOSTD 7.

Thread closed.