im right now doign the atf trink and already but 1 1/2 tablespoon of atf in both rotors turned it over to lube it up but when i took out the spark plugs i forgot where they go so was wondering could you tell me how they go and where and a pic of which number is each spark plug need help fast tho would want to put spark plugs back on
Thanks
TwEaK

 

Leading plugs go in the lower holes BUR7EQ, these plugs will have an L below the plug number.
Trailing plugs go in the top holes BUR9EQ, these plugs will have an L below the plug number.
Rotor number 1 in the front and rotor number 2 is the rear.

 

i know that im just confused on the part the spark plug cables were replaced so i got nothing and some weird NGK spark plugs only thing is one spark plug has 2 blue stripes other doesnt
TwEaK

 

bump

 

NEED HELP FAST!!!!! if i need to go out cause of an emergency and i already put in the ATF and i didnt wait the 24 hours will that mess anything up or will that just do the usual lot of smoke process?? i really need to go out and car is down cause i put ATf in it pls answer me fast
Thanks
TwEaK

 

He just did answer you. Thats all there is to it.

If you cant read any numbers on the plugs, just shove them in the holes and hook up the plug wires right. Itll run.

 

but will i mess anything up if i run the car without waiting the 24 hours???
TwEaK

 

why did you do the ATF in the first place???

You do know that the ATF treatment is really only done if your motor is on its last life and that half the time it will make a motor worse instead of helping???

Anyway, you can mix up the leading spark plug cables and it will still work, since they fire at the same time.

and as far as the trailing leads, the front coil (of the trailing coil pack) is the front rotor, and the rear coil (of the trailing coil pack) is the rear rotor.

and I wouldn't worry about the spark plugs, you will need to replace them after you burn off the ATF anyway. Then you can put new ones in the correct spots.