Assembling Intake to Engine
12-23-07, 01:29 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Florida
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Assembling Intake to Engine
I got a hold of some 5th and 6th valves and rods that open and close them, which I didn't have during build up. So I took off my intake all the way down to the engine. When I had my engine rebuilt the mechanic wanted the lower intake and the exhaust before he would let me take it.
I got the intake off and found the mechanic had used grey RTV along with the metal gasket. Should i use the gasket and rtv or just gasket?
Btw i have a new gaskets for the entire manifold.
I got the intake off and found the mechanic had used grey RTV along with the metal gasket. Should i use the gasket and rtv or just gasket?
Btw i have a new gaskets for the entire manifold.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM